Philips Moire LED Ceiling Light 10W Warm White D240

Description

Philips Moire CL200 10W Warm White LED Ceiling Light The Philips Moire CL200 10W Warm White is a 240 mm round ceiling light that provides balanced general illumination for smaller-to-medium dry indoor rooms. Its 2700K integrated LED source delivers 1000 lm through an easy-to-clean diffuser. • Exact variant: Philips Moire CL200 10W 2700K warm white • Integrated LED: No separate bulb is required • Light output: 1000 lm • Colour rendering: CRI 80 • Optics: Interlaced Optics for broad, even diffusion • Control: Non-dimmable • Rated life: Up to 15,000 hours • Application: Indoor, surface-mounted ceiling lighting Comfortable, Even Room Lighting A rated efficacy of 100 lm/W turns 10W into 1000 lm of warm-white light. The 2700K tone is suited to relaxed residential and hospitality spaces, while the 240 mm profile remains compact on the ceiling. Clean Round Profile The white round housing sits close to the ceiling for an understated finish. Its smooth diffuser is designed for uniform distribution and is easy to keep clean, making the Moire suitable for frequently used residential and light-commercial interiors. Key Benefits • Integrated LED convenience with no replacement lamp to select. • 1000 lm from 10W for efficient warm-white general lighting. • Interlaced Optics help spread light more evenly across the room. • Philips EyeComfort design criteria support comfortable everyday illumination. • Simple white styling works with a broad range of interior finishes. Verified Specifications Series Philips Moire CL200 Power 10W Luminous flux 1000 lm Colour temperature 2700K Efficacy 100 lm/W CRI 80 Input 220–240V AC Power factor 0.5 Dimming Non-dimmable Protection IP20, Class II Diameter 240 mm Height 50 mm Rated life 15,000 h Light source Integrated LED Recommended Uses Recommended for dry indoor bedrooms, dining areas, guest rooms, entrances, corridors and smaller living spaces where a comfortable warm-white ambience is desired. Installation, Safety and Care This is a mains-powered ceiling luminaire. Installation and any electrical work should be completed by a qualified electrician following the Philips instructions and applicable Kenyan electrical requirements. Isolate the supply before inspection or cleaning. IP20 is for dry indoor locations; do not use where the fitting may be exposed to water, weather or excessive moisture. Do not connect it to a dimmer. Clean only when switched off and cool, using a soft dry cloth. Why Choose Philips Moire? This 10W Moire combines a verified 1000-lumen output, compact 240 mm body, warm 2700K colour and Philips integrated LED design. Distributed in Kenya by Red Rhino. Compare Related Philips Moire Lights • Philips Moire 10W Cool White Ceiling Light • Philips Moire 17W Warm White Ceiling Light Frequently Asked Questions Does the Philips Moire require a bulb? No. The LED light source is integrated into the luminaire. What light colour is this version? It produces warm-white light at approximately 2700K. How bright is it? This exact regional variant is rated at 1000 lm. Can it be dimmed? No. This Moire version is non-dimmable. What is its nominal diameter? The verified diameter for this exact version is 240 mm. Is it suitable for a bathroom or outdoors? Its IP20 rating is intended for dry indoor spaces. It should not be used in exposed outdoor locations or areas where water or excessive moisture can reach it. Who should install it? A qualified electrician should install and connect this mains-powered fitting in line with the product instructions and local requirements. What should I verify on delivery? Check the carton and product label for the exact wattage, colour temperature, model code and regional electrical rating before installation, especially when matching several fittings.