Philips Battery Backup Lamp E27 Screw Type

Description

Philips Battery Backup Lamp E27 • Rechargeable LED lamp for normal mains lighting and power-cut backup • Automatic changeover to battery operation when mains power fails • E27 screw fitting • Cool Day Light and Warm White variants in the live catalogue • Instant LED light with low energy consumption • Suitable for open, compatible household lamp holders • Convenient emergency illumination without a separate lantern • Reusable internal battery system The Philips Battery Backup Lamp E27 is a dual-purpose rechargeable LED bulb for everyday room lighting and temporary illumination during electricity interruptions. When mains power is available, it functions as a normal LED lamp and charges its internal battery. If the supply fails while the lamp circuit remains switched on, the lamp changes to battery-powered light, helping keep essential areas visible. Automatic Backup Lighting The integrated battery and changeover circuit remove the need to locate a torch immediately when power goes off. Backup brightness and operating duration are normally lower than full mains performance and vary with the exact regional lamp configuration, battery charge, age and ambient conditions. E27 Lamp Fitting This version is made for an E27 screw holder. Confirm the fitting before purchase: E27 and B22 bayonet lamps are not interchangeable without changing the holder. Switch off the circuit at the distribution board before installing or removing the lamp. Two Light-Colour Options The live Shopify product contains Cool Day Light and Warm White variants. Cool Day Light provides a crisp functional tone for kitchens, passages and work areas, while Warm White creates a softer atmosphere for bedrooms and living spaces. Select the required variant before checkout. Correct Fixture and Circuit Use Use the lamp only in a compatible open fitting with the electrical arrangement specified by Philips. Backup lamps depend on the lamp circuit and switching path to detect a power failure. They are not substitutes for certified emergency-exit lighting or legally required building emergency systems. Key Benefits • Provides normal LED lighting and power-cut backup from one lamp. • Changes to battery mode automatically when correctly installed. • Reduces dependence on disposable-battery torches for short outages. • Offers a choice between functional and ambient light colours. • Uses the widely adopted E27 screw fitting. Verified Specifications Product Philips Battery Backup Lamp Cap / fitting E27 screw Light-source technology Rechargeable LED Operating modes Mains lighting and automatic battery backup Catalogue colour variants Cool Day Light and Warm White Fixture guidance Compatible open lamp holder Emergency-system classification Not a substitute for certified exit or statutory emergency lighting Exact wattage, lumen output and backup duration Confirm on the selected variant's sealed packaging and rating label Ideal Uses • Bedrooms and living rooms • Passages and stair approaches • Small shops and offices • Kitchens and utility areas • Temporary lighting during routine power interruptions Installation, Care and Safety Have the circuit checked by a qualified electrician if the backup function does not operate as expected. Isolate mains power before installation. Do not install in an incompatible holder, enclosed fitting, wet location or dimmer circuit unless the exact package permits it. Keep the lamp switched on long enough to maintain charge, avoid repeated rapid switching and allow ventilation around the body. Replace the product if the casing, cap or battery system is damaged, swollen or unusually hot. Why Choose This Philips Product? The Philips Battery Backup Lamp E27 combines everyday LED illumination with a practical rechargeable backup function in the same familiar fitting. It is particularly useful where brief electricity interruptions are common and immediate basic visibility matters. Distributed in Kenya by Red Rhino. Frequently Asked Questions Does it work as a normal bulb? Yes. With mains power available, it operates as an LED lamp and charges its internal battery. What happens during a power cut? When correctly installed and switched on, it automatically changes to battery-powered light. How long does backup mode last? Runtime varies by exact variant, charge level and battery condition. Confirm the rating on the sealed package. Can it be used in any lamp holder? No. This version requires a compatible E27 screw holder and the correct circuit arrangement. Can it be used with a dimmer? Do not use it on a dimmer unless the exact Philips packaging explicitly confirms compatibility. Is it certified emergency-exit lighting? No. It is a household backup lamp, not a substitute for statutory emergency or exit-lighting systems. Which colour should I choose? Cool Day Light is more functional and crisp; Warm White is softer and more relaxing. Does the battery last forever? No rechargeable battery is permanent. Capacity gradually reduces with age and charging cycles.