Philips LED Sensor Floodlight 50W Warm White 4200 Lumen

Description

Philips LED Sensor Floodlight 50W Warm White 4200 Lumen • 50W integrated LED sensor floodlight • 4,200-lumen catalogue output • Warm White exterior illumination • Built-in movement sensor • Automatic activation when motion is detected • Adjustable floodlight bracket • Mains-powered fixed installation • Suitable for entrances, compounds, paths and service areas The Philips LED Sensor Floodlight 50W Warm White 4200 Lumen combines a fixed LED floodlight with automatic movement detection. Its 50W light source provides 4,200 lumens, while the sensor can activate the light only when movement is detected under the configured conditions. This makes it useful for access points and exterior zones where permanent illumination is unnecessary. 50W / 4,200-Lumen Lighting The documented output is suitable for medium and larger exterior areas, depending on mounting height and beam direction. Final brightness at the ground depends on installation geometry, surrounding surfaces and the area being covered. Movement Sensor The sensor detects motion and triggers the light automatically. Detection distance, angle, hold time and daylight threshold depend on the exact controls and mounting position. Follow the supplied Philips setup guide rather than assuming universal settings. Warm White Light This version produces soft, welcoming illumination. It is suitable for homes, bedrooms, lounges, hospitality spaces and relaxed retail interiors. Confirm the exact Kelvin value on the sealed product. Positioning and Aiming The bracket allows the beam to be directed toward the required zone. Position the sensor away from moving vegetation, public roads, heat outlets and neighbouring activity that could cause unwanted switching. Key Benefits • Provides 4,200 lumens from a 50W LED system. • Switches on automatically when movement is detected. • Reduces unnecessary operating time. • Provides soft, welcoming illumination. • Allows directional aiming. Verified Specifications Product Philips LED Sensor Floodlight Power 50W Luminous flux 4,200 lm Light colour Warm White Sensor Built-in movement sensor Power source Mains electricity Mounting Adjustable bracket Exact IP rating, voltage, detection range and timer Confirm on sealed product and instructions Dimming Not for conventional dimmer control unless explicitly stated Ideal Uses • Gates and entrances • Compounds and driveways • Paths and side passages • Service doors and loading points • Residential and commercial exteriors Installation, Care and Safety A qualified electrician should isolate power, verify the supply and IP rating, secure the bracket and weatherproof every connection. Test the sensor after dark and adjust it to avoid roads, neighbours, vegetation and heat sources. Aim the lamp away from direct eye lines. Do not cover, immerse or service the fitting while energised. Why Choose This Philips Product? This Philips sensor floodlight combines a verified 50W, 4,200-lumen output and Warm White light with automatic motion activation for exterior areas where convenience and controlled operating time matter. Distributed in Kenya by Red Rhino. Frequently Asked Questions What is the wattage? 50W. How bright is it? 4,200 lumens. What colour light does it produce? Warm White. Does it switch on automatically? Yes, when motion is detected under the configured conditions. What is the detection distance? Confirm the exact range in the supplied instructions. Can the timer be adjusted? Check the exact sensor controls and manual. Is it solar powered? No. It requires mains electricity. Can it be installed outdoors? Yes, where the exact IP rating and complete installation permit it.