Philips LED Sensor Floodlight 20W Warm White 1700 Lumen

Description

Philips LED Sensor Floodlight 20W Warm White – 1,700 Lumens • 20W integrated LED floodlight • 1,700-lumen catalogue output • Warm White exterior illumination • Built-in movement sensor • Automatic light activation when motion is detected • Adjustable floodlight bracket • Fixed mains-powered outdoor design • Suitable for entrances, paths, compounds and service areas The Philips LED Sensor Floodlight 20W Warm White combines a compact integrated LED floodlight with automatic motion detection. It provides 1,700 lumens for entrances, gates, small compounds, paths and exterior service spaces, while the sensor can switch the light on only when movement is detected within its configured range. 20W / 1,700-Lumen Lighting The 20W integrated LED provides useful coverage for smaller exterior areas and moderate mounting heights. Final brightness at ground level depends on placement, beam direction, mounting height and surrounding surfaces. Motion-Activated Operation The sensor is intended to detect movement and trigger the light automatically. Detection distance, angle, hold time and ambient-light threshold depend on the exact sensor controls and installation. Confirm these settings from the supplied Philips instructions rather than assuming every sensor floodlight behaves identically. Warm White Exterior Light Warm White creates a softer appearance around homes, hospitality entrances and landscaped areas. It supports practical visibility without the colder tone of daylight floodlighting. Confirm the exact Kelvin value on the product label. Adjustable Aiming The mounting bracket allows the floodlight to be directed toward the required zone. The sensor must also have an unobstructed view of the approach area and should be positioned away from moving trees, hot-air outlets and traffic that may create unwanted activations. Key Benefits • Provides 1,700 lumens from a compact 20W LED system. • Activates automatically when movement is detected. • Reduces unnecessary operating time compared with a continuously lit floodlight. • Creates a comfortable Warm White exterior atmosphere. • Supports directional aiming for entrances and paths. Verified Specifications Product Philips LED Sensor Floodlight Power 20W Luminous flux 1,700 lm Light colour Warm White Sensor Built-in movement sensor Power source Mains electricity Mounting Adjustable bracket Exact IP rating, voltage, detection range and timer settings Confirm on the sealed product and installation guide Dimming Not intended for conventional dimmer control unless explicitly stated Ideal Uses • Gates and entrances • Small compounds and driveways • Paths and side passages • Service doors and loading points • Residential and hospitality exteriors Installation, Care and Safety A qualified electrician should isolate power, confirm the supply and IP rating, secure the bracket and weatherproof every connection. Test sensor coverage after dark and adjust it to avoid public roads, neighbouring property, vegetation and heat sources. Aim the lamp away from direct eye lines. Do not cover, immerse or service the fitting while energised. Why Choose This Philips Product? This 20W Philips sensor floodlight combines verified 1,700-lumen Warm White lighting with automatic motion activation for smaller exterior areas where convenience and controlled operating time matter. Distributed in Kenya by Red Rhino. Frequently Asked Questions What is the wattage? 20W. How bright is it? 1,700 lumens. What colour light does it produce? Warm White. Does it switch on automatically? Yes, when the sensor detects movement under the configured conditions. What is the detection distance? Confirm the exact range in the supplied Philips instructions. Can the timer be adjusted? Check the exact sensor controls and manual for this configuration. Is it solar powered? No. It requires mains electricity. Can it be installed outdoors? Yes, where the exact IP rating and complete weatherproof installation permit it.